Description

Descriptions:
0.3-6.5/0.3-4mm Wood Carving Drill Chuck Hang Shank with Flexible Shaft for Electric Grinding Drill.

Specifications:
Type:
A – Black rubber flexible shaft;
B – Silver stainless steel flexible shaft;
C – 0.3-6.5mm golden hang shank with rubber flexible shaft;
D – 0.3-4mm silver hang shank with rubber flexible shaft.
Size:
A:
Soft shaft length: 990mm.
Soft shaft diameter: 9.4mm.
Shaft length: 790mm.
Shaft diameter: 6mm.
Soft shaft material: rubber.
C: Handle – 148*26mm.
D: Handle – 139*26mm.
Weight:
A – 326g.
B – 314g.
C – 497g.
D – 478g.

Features:
– Multi-purpose machine for metal grinding, wood cutting, jade drilling and jade polishing;
– The product uses an electric grinder with a flexible shaft to easily solve pipes, interfaces and corners that were difficult to reach;
– The handle is small and easy to grasp, suitable for fine polishing, engraving and sanding operations;
– Rubber design, light weight, more suitable for long hours of operation;
– The length of the flexible shaft is approximately 890mm, which extends the working range.

Note:
Before using the soft shaft, it is best to install the machine first. After running for 15 minutes at low speed, the parts inside will be run-in. There will be a little heat within 1-2 hours after use. After the running-in period, it can be used normally without odor.

Instructions:
– When inserting, the bump on the flexible shaft is aligned with the inner notch of the tail of the hanging mill, and then squeezed after pressing;
– Small wrench to tighten the clamping head. (clockwise tightening, counterclockwise loosening)
– Replace the hose core: First, unscrew the internal screws with a hexagon socket, then remove the entire shaft to replace.

Package Included:
1 Pc x Flexible Shaft / Flexible Shaft with Hang Shank