Description

Features:
1. Automatic measuring range.
2. Full measuring range overload protection.
3. Maximum voltage allowed at the measuring end: 500V DC or 500V AC(RMS).
4. Work height: maximum 2000m.
5. Display: LCD.
6. Maximum display value: 2000 digits.
7. Polarity indication: Self-indicating, ‘-‘ means Negative polarity.
8. Over-range display: ‘0L’ or ‘-0L’.
9. Sampling time: The meter figures show about 0.4 seconds.
10. Automatic Power off time: About 5 minutes.
11. Operational power: 1.5Vx2 AAA battery(not included).
12. Battery low voltage indication: LCD display symbol.
13. Operational temperature and humidity: 0~40 C/32~104F.
14. Storage temperature and humidity: -10~60 C/-4~140F.
15. Boundary dimension: 1274225mm.
16. Net weight: about 67g.

1. DC voltage-Specification:
Range:500V;
Maximum Resolution:0.01V;
Accuracy:(0.8% reading + 3 digits);
Auto Mode Sensitivity: Minimum 0.50V DC Voltage;
Input Impedance: 1M;
Maximum input voltage: 500V DC or AC rms.;
Others: When the measured value is greater than 90V, the red backlight is on.

2. AC voltage-Specification:
Range:500V;
Maximum Resolution:0.01V;
Accuracy:(1.2% reading + 5 digits);
Auto Mode Sensitivity: Min. 0.80V AC Voltage;
Input Impedance: 1M;
Maximum input voltage: 500V DC or AC rms.;
Frequency range: 40Hz~1000Hz, true RMS response;
Others: When the measured value is greater than 90V, the red backlight is on.

3. Resistance-Specification:
Range:0-10M;
Maximum Resolution:1;
Accuracy:(1.2% reading + 3 digits).

4. Frequency-Specification:
Range:1000Hz;
Maximum Resolution:0.1Hz;
Accuracy:(2.0% reading + 3 digits);
Frequency range: 40Hz-1000Hz.

5. Beep on and off-Specification:
When the built-in buzzer sounds, the measured resistance is less than about 30.

Package Includes:
1 x Multimeter(battery not included);
2 x Test Leads;
1 xMini Screwdriver;
1 xUser Manual.

NOTE:
1. Accuracy applies within one year of calibration.
2. Base conditions: ambient temperature 18C to 28C. Relative humidity not more than 80%RH.
3. Do not input a voltage higher than 500V, it is possible to display a higher voltage value, but there may be a risk of damage to the meter.
4. When measuring high voltages, take extra care to avoid electric shock.
5. After completing all measurement operations, disconnect the test leads from the circuit under test.